DS-D42V06-N

LED Controller

  • Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device
  • Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled
  • An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync
  • The mosaic source is composed of two sources (2K×1K@60Hz) accessed to the OPT 1
  • Work with software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality
  • Up to 4 units cascaded for image mosaic
Category:
Driving Method Constant current driving
Scanning Amount 60
Frame Frequency 60 Hz
Refresh Rate 3840 Hz
Grey Level 16 bit
DS-D4012CW-2FQ

Dimensions 300 × 168.75 mm
Module Resolution 240 × 135

White Balance Brightness 600 cd/㎡
Color Temperature 3000-10000 K adjustable
Viewing Angle 160°(H)/160°(V)
Contrast Ratio 5000:1
Color Uniformity ≤ ± 0.003Cx,Cy
Brightness Uniformity ≥ 97%

Fine Pixel Pitch Indoor Full-color LED Display

Max. Consumption ≤ 460 W/㎡
Average Consumption ≤ 160 W/㎡
Input Voltage 100~240 VAC ± 10%

Package Dimensions (W × H × D) 722 (W) mm × 438 (H) mm × 193 (D) mm (28.425 ” × 17.244 ” × 7.598 ”)

Packing List Regulatory Compliance and Safety Information × 1. Several connecting screws, light bulbs, driver IC, iron sheets

G.W. 4.5 kg(1 package in 1 box)
Net Weight 3.4 kg

Pixel Configuration SMD Triad LED (with glue)
Pixel Pitch 1.25 mm
Pixel Pitch Category P1.2
Pixel Density 640000 dots/㎡
Modules Component 2 × 2
Dimensions (W × H × D) 600 mm × 337.5 mm × 29.5 mm (23.622″ × 13.287″ × 1.161″)
Resolution 480 × 270
Area 0.2025 ㎡
Weight 3.4 Kg
Cabinet Material Aluminium die casting
Maintenance Method Front maintenance for all components

Working Temperature -10 ℃ to 40 ℃ (14 ℉ to 104 ℉)
Working Humidity 10% to 60% RH (without condensation)
Storage Temperature -20 ℃ to 60 ℃ (-4 ℉ to 140 ℉)
Storage Humidity 10% to 85% RH (without condensation)

Pixel Configuration SMD Triad LED (with glue)
Pixel Pitch 1.25 mm
Pixel Pitch Category P1.2
Pixel Density 640000 dots/㎡
Modules Component 2 × 2
Dimensions (W × H × D) 600 mm × 337.5 mm × 29.5 mm (23.622″ × 13.287″ × 1.161″)
Resolution 480 × 270
Area 0.2025 ㎡
Weight 3.4 Kg
Cabinet Material Aluminium die casting
Maintenance Method Front maintenance for all components

Pixel Configuration SMD Triad LED (with glue)
Pixel Pitch 1.25 mm
Pixel Pitch Category P1.2
Pixel Density 640000 dots/㎡
Modules Component 2 × 2
Dimensions (W × H × D) 600 mm × 337.5 mm × 29.5 mm (23.622″ × 13.287″ × 1.161″)
Resolution 480 × 270
Area 0.2025 ㎡
Weight 3.4 Kg
Cabinet Material Aluminium die casting
Maintenance Method Front maintenance for all components